Product Details:
|
Material: | SUS304 | Voltage: | 380V/220V |
---|---|---|---|
Power: | 1.5kw | Capacity: | 2ton Per Hour |
HS Code: | 8438600000 | Accessory Need: | Air Compressor |
Matched Equipment: | Onion Top Tail Cutter | Onion Size: | Shallot 30-50mm, Onion 60-120mm Or Customized |
Highlight: | onion slicer machine,onion peeling machine |
Introduction of onion peeler machine & root cutting
HYC series onion peeling machine is the most advanced onion processing equipment with large output both at home and abroad.
This machine is widely used in vegetable processing industry because it can peel and cut root of spring onion in any state at one time, and can be stripped clean without damage.
this onion peeler has low processing cost and high processing efficiency. Our onion peeler can be used to peel all kinds of onions, no need to grade onions, no requirement to onion’s original place, applicable to both dried and freshonions.
(Notice:Our this series of onion peeler / onion peeling machine is not suitable for commercial kitchens; it is designed rather to operate in a food/spice processing factory.)
Feathers:
1, onion without classification, size, dry wet, origin of unlimited, perfect skin.
2, peeling automation, one-time completion and skin clean, no damage.
3, free control of peeling depth of layers, only peeling the dead skin or peel the second layer of skin can be perfect.The equipment automatically adjusts the cutting root size according to the different size of the onion, so that it can be cut out
Small amount of onion removal, high yield.
4. The equipment is designed without wearing parts, with longer service life, lower cost and higher efficiency.
5, 304 stainless steel body and the shell, more in line with international health standards.
Advantages:
Compared with similar products of other manufacturers, this machine has the following special advantages:
1. This machine adopts the processing method of not cutting the root and peeling the skin, so the peeled spring onion has a small amount of peeling, high yield, and the inside is clean and clean without pollution, while other manufacturers cut it first
Scallions that have been peeled from the roots will cause a second pollution and a large amount of peeling will result in a low yield.
2. The root cutting machine adopts conveyor belt to work continuously, and the head and tail are removed at one time, with high speed and efficiency.
3. The machine has low energy consumption, high output and can peel 2 tons per hour, which is unique in the current scallion peeling machinery industry, and our motor power is only 2 tons
1.5-3.25 KW, air compressor exhaust pressure 8-10 mpa, from 4 to 5 m3 / min.Save energy and reduce costs.
4. This product adopts no more than standard wearing parts design, conveyor belt chain, bearing, skeleton and other materials are made of 304 stainless steel, durable, rubber roller is used for peeling
Imported materials, high wear resistance.All kinds of cylinders in the equipment belong to common standard parts and can be bought in pneumatic parts stores all over the world.The cost of using this machine
Lower, the most cost-effective!
Parameter of Onion Peeling Machine
Item
|
Single belt onion peeler
|
Double belts onion peeler
|
Three belts onion peeler
|
Model
|
HYC-1
|
HYC-2 | HYC-3 |
Voltage
|
380v/50Hz
|
380v/50Hz
|
380v/50Hz
|
Power
|
1.5KW
|
1.5KW
|
2.2KW
|
Air pressure
|
≥0.8Mpa, 4m3/min
|
≥1.0Mpa, 5m3/min
|
≥1.0Mpa, 6m3/min
|
Capacity
|
500-700kg/h
|
1000-1500kg/h
|
2000-2500kg/h
|
Machine Size
|
2100*830*1800mm
|
1950*1100*1950mm
|
2600*1200*1800mm
|
Weihgt
|
248kg
|
270kg
|
320kg
|
Tips: You need an air compressor to run the onion peeling machine / automatic onion peeler .
|
Contact Person: Mr. Jacky Miao
Tel: +8615136129173
Fax: 86-371-56787763