Product Details:
|
Material: | SUS304 | Voltage: | 380V/220V |
---|---|---|---|
Power: | 1.5kw | Capacity: | 2ton Per Hour |
HS Code: | 8438600000 | Accessory Need: | Air Compressor |
Matched Equipment: | Onion Top Tail Cutter | Onion Size: | Shallot 30-50mm, Onion 60-120mm Or Customized |
High Light: | onion slicer machine,onion peeling machine |
Introduction of onion peeler machine & root cutting
HYC series onion peeling machine is the most advanced onion processing equipment with large output both at home and abroad.
This machine is widely used in vegetable processing industry because it can peel and cut root of spring onion in any state at one time, and can be stripped clean without damage.
this onion peeler has low processing cost and high processing efficiency. Our onion peeler can be used to peel all kinds of onions, no need to grade onions, no requirement to onion’s original place, applicable to both dried and freshonions.
(Notice:Our this series of onion peeler / onion peeling machine is not suitable for commercial kitchens; it is designed rather to operate in a food/spice processing factory.)
Feathers:
1. No-need classification, no limit of onion size, wet and origin place ,all can be perfectly cutting roots.
2. Automatically peeling and cutting root, finish for one-time, clean and no damage.Continuous uninterrupted working.
3. "Cortex Controller"on the machine can freely control the peeling layer and depth,peel dry skin only or peel the second skin then, the third layer of skin can be realized perfectly.
4. The removal volume of root and head cutting is small, high production rate, and the onion size can be automatically recognize, to make the smallest cutting volume for any size onion.
5. Adopt no-knife peeling onion skin, so the peeled onion with no damage, and with perfect appearance.
Advantages:
Compared with similar products of other manufacturers, this machine has the following special advantages:
1. This machine adopts the processing method of not cutting the root and peeling the skin, so the peeled spring onion has a small amount of peeling, high yield, and the inside is clean and clean without pollution, while other manufacturers cut it first Scallions that have been peeled from the roots will cause a second pollution and a large amount of peeling will result in a low yield.
2. The root cutting machine adopts conveyor belt to work continuously, and the head and tail are removed at one time, with high speed and efficiency.
3. The machine has low energy consumption, high output and can peel 2 tons per hour, which is unique in the current scallion peeling machinery industry, and our motor power is only 2 tons
1.5-3.25 KW, air compressor exhaust pressure 8-10 mpa, from 4 to 5 m3 / min.Save energy and reduce costs.
4. This product adopts no more than standard wearing parts design, conveyor belt chain, bearing, skeleton and other materials are made of 304 stainless steel, durable, rubber roller is used for peeling
Imported materials, high wear resistance.All kinds of cylinders in the equipment belong to common standard parts and can be bought in pneumatic parts stores all over the world.The cost of using this machine Lower, the most cost-effective!
Parameter of Onion Peeling Machine
Item
|
Single belt onion peeler
|
Double belts onion peeler
|
Three belts onion peeler
|
Model
|
HYC-1
|
HYC-2 | HYC-3 |
Voltage
|
380v/50Hz
|
380v/50Hz
|
380v/50Hz
|
Power
|
1.5KW
|
1.5KW
|
2.2KW
|
Air pressure
|
≥0.8Mpa, 4m3/min
|
≥1.0Mpa, 5m3/min
|
≥1.0Mpa, 6m3/min
|
Capacity
|
500-700kg/h
|
1000-1500kg/h
|
2000-2500kg/h
|
Machine Size
|
2100*830*1800mm
|
1950*1100*1950mm
|
2600*1200*1800mm
|
Weihgt
|
248kg
|
270kg
|
320kg
|
Tips: You need an air compressor to run the onion peeling machine / automatic onion peeler .
|
Contact Person: Jacky Miao
Tel: +8615136129173
Fax: 86-371-56787763