|Model:||HDF-S01||Function:||Fruit And Vegetables Slicer Machine|
|Material:||304 Stainless Steel||Machine Size:||750*650*1100mm|
|Warranty:||2 Year||Key Words:||Commercial Vegetable Slicer Cutting Machine|
potato chips cutting machine,
industrial vegetable cutting machine
The multifunction vegetable slicer cutting machine uses a rotating cutter to cut the agricultural products of Huaishan, lotus root, cassava, sweet potato (sweet potato), radish cucumber, bitter gourd, potato, etc. into a sheet shape, with good cut surface quality, thin and uniform size, and cut tissue. Fresh, does not damage fibrous tissue.
At the same time, the mushroom slicer machine has high slicing efficiency, convenient operation, low energy consumption, health, safety and high efficiency, and is an ideal equipment for agricultural product processing. It mainly consists of a frame, a rotating cutter head, a transmission part, a motor, a discharge port, etc. It is suitable for slicing of medium-sized, long cylindrical materials (such as yam, lotus root, cassava, sweet potato (sweet potato), radish).
1. For cutting kinds of Long cylindrical shapes of fruit and vegetable into slice and oval shapes. Such as Chinese yam, lotus root, banana, kiwi, etc.
2. Finished product thickness is very uniform.
3. this machine includes machine rack, rotary knife, drive part, electric motor and discharging hole, etc.
The potato chips slicing machine is used for slicing root based vegetables and fruits into uniform round slices. Such as cassava,cucumber,sweet potato,turnip,carrot,lotus root,eggplant,onion,potato,tomato apple,lemon,kiwifruit,banana etc.
|Product name||Potato chips cutting machine|
|Number of blades||6|
|Material||304 Stainless steel|
Installation and commissioning:
Place the vegetable slicer machine on a dry, ventilated level surface before use to ensure that the machine works smoothly and reliably. Check all parts before use, whether the fasteners are loose during transportation, whether the switch and power cord are damaged due to transportation, and whether there is foreign matter in the hopper or the box. Check that the power supply voltage matches the voltage used by the unit. Extend the power cord, ground the yellow-green core with the grounding symbol, and connect the remaining three cores (two for the single-phase motor) to the open load switch (the knife switch). On the lead terminal. Open the front door before work, and use the dial to check if there is any impact on the tool. If it is, loosen the tightening bolt on the turntable, move the turn slightly outward, and then tighten the tightening bolt. Close the open load switch, start the open button, depending on whether the cutter is running in the correct direction, observe the counterclockwise rotation from the inlet port to be correct, otherwise adjust the power cord, wait until the cutter runs in the correct direction and then test the no-load, no abnormalities in each part. You can test the machine.
Contact Person: Jacky Miao